AGA full-face masks
Aqualung / USDivers / Apeks
A list of the manufacturers whose equipment we CANNOT service includes:
Further, there is an age limit on the regs we can service, primarily due to parts availablity.
If you believe your regulator was built before 1996, please give us a call prior to shipping it to us. 334-714-1336
For annual warranty service on regulators, we charge:
$35 per stage, plus parts, for our normal14 day service, or...
$45 per stage, plus parts, for 8 to 13 day service, or
$50 per stage, plus parts, for 3 to 7 day service, or
$65 per stage, plus parts, for 24 to 48 hour service.
For this, we completely disassemble the regulator and clean all of the parts as prescribed by the manufacturer. We then reassemble the regulator, replacing the warranty parts (typically this includes but may not be limited to, the filter, valve seats, and dynamic O-rings), and inspecting all of the components. Once reassembled, the regulator is put on our flow bench and tuned to the manufacturer's specifications for interstage pressures, flow rates, cracking pressure (inhalation effort) and exhalation effort.
Annual service for a BCD is the same as for a regulator stage.
For this, we disassemble and clean the inflator valve, dump valve, and overpressure valves, check all the straps and buckles, and do a comprehensive leak test.
Scuba cylinder hydrostatic tests are $40. Visuals are $20 and include an air fill. We are certified Cylinder Training Services.
We offer factory trained service on almost every piece of sport diving equipment from every manufacturer made in the last 20 years.
A list of the manufacturers whose equipment we normally service includes:
Dacor prior to 1998
Neptune full-face masks
OTS Guardian full-face masks